ETP Series Electronic to Pneumatic Transducer

$104.13 – $250.60

Direct connection to PCs for pneumatic control., two-wire loop powered or three-wire voltage models, easily accessible wiring terminal blocks, panel mounting with supplied snap-track, high accuracy with low hysteresis, driftless operation with high repeatability, AC/DC operation.

ETP-9520-E-GETP-9520-E-G I/P Interface 4-20mA loop powered 2 wire with enclosure and gage$169.13
ETP-9520-EETP-9520-E I/P Interface 4-20mA loop powered 2 wire with enclosure$118.23
ETP-9520ETP-9520 I/P Interface 4-20mA loop powered 2 wire$104.13
ETP-9510-E-GETP-9510-E-G E/P Interface 2-10 Vdc loop powered 2 wire with enclosure and gage$169.13
ETP-9510-EETP-9510-E E/P Interface 2-10 Vdc loop powered 2 wire with enclosure$118.23
ETP-9510ETP-9510 E/P Interface 2-10 Vdc loop powered 2 wire$104.13
ETP-9500-E-GETP-9500-E-G I/P Interface 4-20mA or 0-10 Vdc 3 wire with enclosure and gage$187.00
ETP-9500-EETP-9500-E I/P Interface 4-20mA or 0-10 Vdc 3 wire with enclosure$136.10
ETP-9500ETP-9500 I/P Interface 4-20mA or 0-10 Vdc 3 wire$122.00
ETP-9520-PWETP-9520-PW PW/P Interface 4-20mA output$250.60
Categories: ,

Description

The ETP-9500 Series transducers convert an electrical input signal to a pneumatic output signal to position pneumatic damper and valve actuators in HVAC systems. The ETP-9520 accepts an industry standard 4-20mA current input signal and produces a proportional 3-15 psig pneumatic output. The ETP-9500 offers more flexibility as it is field selectable to accept either a 4-20mA or a 0-10 VDC input signal to control the 3-15 psig pneumatic output. The ETP-9520-PW accepts a field selectable pulse width signal to control the pneumatic output. The ETP-9520 is powered by the process loop signal and requires no power supply. The ETP-9500 is also loop powered in the 4-20mA configuration and will accept a wide range of AC or DC power supply voltages in the 0-10 VDC mode. The ETP-9520-PW requires a 24 VDC or 22 to 28 VAC power supply.

Reviews

There are no reviews yet.

Be the first to review “ETP Series Electronic to Pneumatic Transducer”

Your email address will not be published. Required fields are marked *