Description

Applications & Specifications:

• AM-708 500 Ohm resistor, converts a 4 to 20 mA signal to a 2 to 10 Vdc signal for MS40-7043, 7073, 7153,717x, 6083, 6153, 6343
• AM-709 Damper Shaft Position Indicator used in short shaft applications to show the shaft position. Used with 3/4″ diameter round shaft or 1/2″ square shaft for Mx40-704x actuators
• AM-710 Universal Clamp used to clamp the actuator to 3/4″ diameter round shafts and 3/8″ to 5/8″ hex shafts or 1/2″ square shafts for Mx40-704x. If using AM-676 shaft extension the AM-710 is required.
• AM-711 Crank arm kit attaches to the actuator and provides a crankarm for non-direct mounting applications. For up to 1/2″ round shafts for Mx40-704x
• AM-712 Crank arm kit includes AM-711 plus an actuator mounting bracket, 3 flatwashers, 3 sheet metal screws, and 3 self-tapping screws. Provides mechanical linkage between the damper actuator and the damper shaft when a direct couple is not possible. Use with Mx40-704x
• AM-713 Mounting bracket for Honeywell Mod IV M6415-type actuators or use with Mx40-704x.