Wall Switch Occupancy Sensor (Manual-ON/Auto-OFF)
Square D® Wall Switch Occupancy Sensor with Manual-On employs the latest passive infrared (PIR) technology to automatically control lighting for areas up to 1000 square feet. Complies with California Title 24 Residential Building requirements for Bathrooms, Garages, Laundry Rooms and Utility Rooms.
For maximum energy savings, the Square D Wall Switch Occupancy Sensor with Manual-On requires the user to switch on lighting manually by pressing the button on the front. Employing a special 180° multi-segmented lens and PIR motion sensor, the sensor reliably detects occupancy to keep lights on while the room is occupied. This unit will automatically switch the lights off after a pre-set delay if no motion is detected.
The Square D Wall Switch Occupancy Sensor is easy to install. Connecting to existing active line and ground wiring similar to a typical wall switch, the Wall Switch Occupancy Sensor is the simplest way to achieve energy-saving lighting control with minimal installation time.
To assure long relay life, Square D has developed a low energy switch circuit to assure maximum contact life. These sensors are compatable with electronic and magnetic ballast loads.
--Available in white and ivory with matching decorator wall plate cover.
--Manual On / Auto Off
--120 or 277 VAC input (no neutral required)
--No power pack required
--No minimum load
--180° field of view (Up to 1000 sq. ft.)
--User adjustable time delay from 15 sec. - 30 minutes
--Red LED motion indicator blinks to indicate motion detection
--Suitable for use on all electronic and magnetic ballasts
--Furnished with (3) x 6 inch external wires (pig tails)
--UL and cUL Listed
Download Product Spec Sheet